Logo

Our Blog

Aging In Place Market For Universal Design

July 27, 2013 4:22 pm Published by Leave your thoughts

Aging In Place is defined as “the ability to live in one’s own home- wherever that might be- for as long as confidently and comfortably possible”.

Did you know that since January 1st, 2006, on average, the 17 million or so baby boomers are celebrating a 60th birthday every seven seconds, and these celebrations will continue for the next 12 years?  This demographic impact shift will increase the need for many home modifications as the baby boomers “Age In Place”. These remodel transformations will consist of more than just widening  of doorways to allow for a walker or a wheelchair as the Principles of Universal Design become popular.

The factors of genetics, lifestyle, and environment combine to drive demand within the Aging In Place market for Universal Design. This is the design of products, services, and environments that are usable by as many people as possible regardless of age, ability, or situation and without the need for adaptation or specialized design.

Universal Design targets multi- generational use and has an emphasis on aesthetics. The idea is to enter a home or any Universal Design environment and not even notice that features exist for users with unequal abilities.

One of the simplest examples of Universal Design is a door lever in place of a knob. A lever handle set requires minimal physical effort to open for a senior, a child or even a companion canine assistant.

While earning the Certified Aging In Place Designation from the National Association of Home Builders (NAHB), I practiced an exercise to simulate debilitating arthritis in ones hands. The task was to open a door that had a round door knob and only using one hand. I placed a tennis ball in the palm of my hand and wrapped all five fingers around the ball to create a firm hold. Then a long tube sock was pulled over my hand holding the tennis ball. Trying to turn the round door knob proved to be very difficult in this condition.  This is an example of one of the most common Universal Design Principles.

When done well, Universal Design elements are virtually invisible in the home. However, few homes or home features will ever be completely universal.  Ones needs will certainly vary by individual whether at first occupancy or due to an accident, illness or aging. There will always be a need for customized, accessibility features or assistive technology to bridge the gap. The goal of Universal Design is to create an environment where those occasions are less frequent and less costly.

Consider the Seven Principles of Universal Design:

Equitable Use– Identical or equivalent use for all users

Flexibility in Use– Accommodates a wide range of preferences and abilities (e.g. right vs. left handed)

Simple and Intuitive Use– Accommodate a wide range of literacy and language skills

Perceptible Information– Use redundant presentation of essential information (sight, hearing …)

Tolerance for Error– Minimize hazards for unintentional or accidental use

Low Physical Effort– Minimize sustained effort while maintaining a neutral body position

Size and Space for Approach and Use– Provide adequate space for a standing or seated user

For more information on Universal Design visit NC State University’s www.universaldesign.com

For more about Aging In Place and to complete an Aging In Place Audit visit: www.planningtomorrow.com

 

Chad D Collins 2014 NAHB Certified Green Home Professional of the Year (3) Chad D. Collins, Accredited Master Builder

An area native, NC Licensed General Contractor, National Association of Home Builders Master Certified Green ProfessionalTM, and Certified Aging-in-Place Specialist, Chad is one of less than 50 Accredited Master Builders in the state. He achieved this professional designations after years of experience and numerous hours of coursework via the NC Builder Institute. Chad has been an active member of the building industry since the early 1990’s. He joined the Home Builders Association (HBA) of Durham, Orange, and Chatham Counties in 2005. Chad was soon named HBA Recruiter of the Year and he subsequently chaired various HBA committees. Chad is a Licensed Home Inspector, as well as, a Licensed Lead Abatement professional.

In addition to industry awards in recognition of excellence in home building and remodeling, Collins Design-Build has twice been named Building Company of the Year via the HBA’s Triangle Sales and Marketing Council MAME (Major Achievements in Marketing Excellence) Awards. The company has also received a Best Green Built Home STARS Award from the NCHBA. Currently, Chad serves as 1st Vice President of the HBADOC, and recently completed one of Durham’s first LEED (Leadership in Energy and Environmental Design) residential projects. LEED is a green building certification program that recognizes best-in-class building strategies and practices. To receive LEED certification, projects must satisfy pre-requisites and earn points to achieve various levels of achievement.

In 2014 Chad was selected as the HBADOC 2014 Builder of the Year and recently honored at The International Builders Show in Las Vegas as the NAHB’s Certified Green Home Professional of the Year.

Contact Chad at 919-422-2818 or via email chad@collinsdesignbuild.com

To learn about homeownership opportunities, contact Emilee at emilee@collinsdesignbuild.com

 

Categorised in: , , , , , ,

This post was written by Chad Collins

SIGN UP FOR OUR LATEST NEWS

Our Affiliations

blah